8
L10 SERIES RADIO CONTROL MANUAL
PN 701L10005.1.5
5.0 Operation
5.1 General Precautions
5.1.1 After operating, please press EMS (Emergency Mushroom Stop)
mushroom to shut off main power in the receiver remove transmitter key.
5.1.2 Stop operating when irregular response occurs due
to insufficient transmitter power, beyond the remote control
range, or severe interference.
5.1.3
Remove the batteries when the equipment is not going to be
used for a long period of time.
5.1.4 Operators must be properly trained and certified, understanding
safe operation of the machine and this radio control.
5.1.5 Operator must be familiar with emergency procedures
before operating (See Section 5.4).
5.1.6 Transmitter is durable and weather-resistant, but care should be
taken not to subject it to severe impacts or undue abuse.
5.1.7 This product is suitable for use in industrial environments. Proper
care and maintenance will extend system’s life.
5.1.8 Check EMS mushroom and the other security functions of entire
system before daily operation, including (but not limited to) switches,
E-Stop operation, etc.
5.1.9 Stop operating if the operator’s view is not clear of machine or
load.
5.1.10 Press EMS mushroom when malfunctions or abnormal conditions
occur.
5.2 Standard Operation
5.2.1 Default Power On Procedure
1. Rotate EMS mushroom clockwise and pull out.
2. Turn rotary key switch clockwise to “ON” position.
3. Continue to turn key switch to “START” position in order to turn on
power (after releasing the rotary key switch, it will automatically return to
the “ON” position).
5.2.2 Transmitter Power Indication
Transmitter has power indication function with LED display.
“Green Color Flashing” Sufficient power to operate transmitter
(In order to save power, one can program to turn off LED
display when power level is sufficient).
“Red Color Flashing” Insufficient Power. Transmitter will send
out an emergency stop signal to the receiver due to insufficient
power. Operator should avoid this situation in order to maintain
operation safely.