Disclaimer
This Quick Start Guide (the “QSG”) provides basic product and installation overview of the Condair Humilife Humidifier (the “Humilife Humidifier”) and
is for general information purposes only. The general installation guidelines contained herein do not purport to cover all details of the Humilife
Humidifier nor do they provide for every contingency met in connection with installation. Please consult the complete Installation Manual and
Operation Manual for a more comprehensive installation guide and for general operation, maintenance, and troubleshooting information, including
Condair’s suggested storage, packaging, and transportation guidelines. The Installation Manual and Operation Manual contain specific system,
accessories, and components. Copies of the complete Installation Manual and Operation Manual can be found at:
. Please
read all Cautions and Warnings before installing and using the Humilife Humidifier.
All electrical connections must be installed in accordance with local and national electrical code requirements by a licensed electrician.
All water supply and drain line connections must be installed in accordance with local plumbing codes by a licensed plumber.
Condair does not accept any liability for installations of humidity equipment installed by unqualified personnel or the use of
parts/components/equipment that are not authorized or approved by Condair.
Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
l
Reorient or relocate the receiving antenna.
l
Increase the separation between the equipment and receiver.
l
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
l
Consult the dealer or an experienced radio/TV technician for help.
