Page 23
• Connecting a antenna or CATV cable to the TV RF IN terminal before TV SETUP.
• Use the remote control to access and adjust features as desired.
1. Press the FUNCTION button until TV appears on the display.
2. Press the TV SETUP button to open the TV SETUP menu.
3. Press the TV CH+ or TV CH- button to select the menu option, then press the SET button to enter the
sub-menu.
4. Press the TV CH+ or TV CH- button to select the sub-menu option, then press the SET button to confirm.
5. Press the TV CH+ or TV CH- button to select YES or NO, then press the SET button to confirm.
6. Select Exit and press SET button to close the TV SETUP menu.
NTSC CATV or NTSC AIR setting
Add channel :
Add the TV channel
Delete channel :
Delete the TV channel
Auto scan :
Automatically tunes in and presets receivable TV stations
Add all channel :
Add all TV channel
Delete all channel :
Delete all TV channel
Exit :
To exit the TV SETUP menu
Automatically Preset the TV Stations
• All the TV stations in your area that can be received by the unit are automatically preset.
1. Press the TV SETUP button to open the TV SETUP menu.
2. Press the TV CH+ or TV CH- button to select NTSC CATV or NTSC AIR, then press the SET
button to enter the sub-menu.
3. Press the TV CH+ or TV CH- button to select AUTO SCAN, then press the SET button to confirm.
Notes:
• Unused channels are automatically skipped.
• The screen show the first received channel when full auto channel preset is finished.
(continued to next page)
NOTE:
UHF/VHF WAVEBAND
This unit will search the VHF waveband before the UHF waveband. Therefore if you do not live in any
area where VHF television signals are transmitted, it may take a little time before any stations are
registered. Please note that up to 8 minutes may elapse before the search is completed.
TV SETUP
ST P
E
2
ST P
E
3
TV SETUP
NTSC CATV
NTSC AIR
Exit
NTSC CATV
Add channel
Delete channel
Auto scan
Add all channel
Delete all channel
Exit
