Page 12
(continued on next page)
This owner’s manual explains the basic instructions of this DVD Unit. Some DVD discs are
produced in a manner that allows specific or limited operation during playback. As such,
the DVD Unit may not respond to all operating commands. This is not a defect in the DVD
Unit. Refer to the instruction notes of discs.
“ ” may appear on the TV screen during operation. A “ ” means that the desired operation
is not permitted by the DVD Unit or the disc.
Playing a Disc
1. Press the POWER ON/OFF button on the unit or press the STANDBY button on the remote control
to turn on the Unit while the Unit is in standby mode, press the FUNCTION button to select DVD mode.
See CUSTOMIZING THE FUNCTION SETTINGS (page 26 to 33) before proceeding to step 2.
2. Press the OPEN / CLOSE button. The disc tray opens.
3. Place the disc on the disc tray with the label side up.
4. Press the OPEN / CLOSE button. The disc tray closes.
It takes a short while for your Unit to load the disc. After loading, for some discs, the Unit will
automatically start playback of the disc.
5. Press the PLAY button.
Notes:
• Use the OPEN / CLOSE button on the front panel to open or close the disc tray. Do not push the
disc tray or you may damage the Unit.
• Let the disc tray open completely before removing the disc. Press the OPEN / CLOSE button to
close the disc tray after you remove the disc.
Pausing playback (still mode)
Press the II PAUSE button. To resume normal playback, press the PLAY button.
Stopping playback
Press the
■
STOP button at the location where you want to interrupt playback. To resume playback at
the position where the disc was stopped, press the PLAY button.
If you press the
■
STOP button twice, the Unit’s memory will be cleared and pressing the PLAY
button will reset the disc to the beginning.
To skip to a different track
• Press the PREV button on the remote once to skip to the start of the previous track.
• Press the NEXT button on the remote to skip to the next track.
• For audio CD disc, use the number buttons (remote control only) to jump straight to that track number.
PLAYING A DISC
Basic playback
DVD
CD
