Concept2 VP9142, Руководство пользователя

Страница: 31 / 40

29 VP9142
EN
OPTIONAL ACCESSORIES
The following appliance accessories can be purchased additionally:
Paper dust bags
(5 bags + 2 motor filter)
Order code sms9000 Price according to the applicable price list
Textile dust bag, 1 Ord. code ts9140 Price according to the applicable price list
Motor filter Order code 44291322 Price according to the applicable price list
H.E.P.A. air outlet filter Order code 44291323 Price according to the applicable price list
TROUBLESHOOTING
Problem Cause Solution
The motor isn‘t running.
The plug is inserted into the socket
incorrectly or insufficiently.
Check the plug connection.
The socket isn't live.
Check to make sure voltage is present, e.g. by
using another appliance.
Motor has stopped
operating.
The air flow is improper or too
low and, consequently, the
motor overheating fuse has been
activated.
Disconnect the power supply cable from
the socket.
Check and release the air suction
and discharge passages and the dirt filters,
or replace the dust collection bag. Let the
appliance cool down.
Front cover cannot be closed
The dust collection bag is inserted
incorrectly. Check to make sure that the dust collection
bag has been inserted properly.
Reduced suction power
The dust collection bag is full or
clogged.
Replace the dust collection bag.
The filter is clogged. Clean or replace the filter.
The attachment, tube, or hose is
clogged. Check and clear the air suction and exhaust
passages.
Vacuum cleaner heats up Slight heating of the vacuum cleaner is normal and cannot be considered a failure.
MOTOR FILTER CLEANING AND REPLACEMENT
1. Disconnect the flexible hose and open the appliance cover.
2. Pull the dust collection bag out of its holder so that you can access the motor filter more
easily.
3. Remove the motor filter (Fig. 5). You can clean the filter by tapping and shaking. If the
filter is heavily soiled, you can wash it in lukewarm water and let it dry properly.
4. Insert the cleaned or new motor filter into the appliance and close the cover.
CLEANING AND REPLACEMENT OF THE AIR OUTLET FILTER
1. Open the air outlet grid in the appliance‘s rear section (Fig. 6).
2. Remove the air outlet filter. This type of vacuum cleaner is equipped with an H.E.P.A. filter
in the outlet, which is capable of catching even very fine dust particles. You can clean
this filter by tapping and shaking, and then with a soft brush.
3. Insert the cleaned or new air outlet filter into the appliance and close the air outlet grid.
Fig. 6