27
VP9142
EN
OPERATING INSTRUCTIONS - VACUUM CLEANER ASSEMBLY
NOTE:
Before fi xing or removing accessories, always pull the plug out of the electrical socket!
1. Connecting the fl exible hose to the appliance
Insert the fl exible hose into the appliance‘s air suction inlet.
Continue pushing until you hear a clicking sound, which indicates that the correct
position has been reached.
To remove the fl exible hose, press both stopper buttons and remove the hose (Fig. 1).
The suction power can be controlled manually on the hose handle with a slide
throttle.
When the slide throttle is closed, the air fl ow is stronger.
Slide throttle in open position - weaker air fl ow.
2. Attaching the telescopic tube to the hose adapter
Put the telescopic tube on the hose adapter and turn it slightly.
3. Extending the telescopic tube
Press the plastic latch and pull the smaller tube outwards.
4. Fixing the fl oor attachment to the telescopic tube
Insert the telescopic tube into the fl oor attachment and turn it slightly.
The fl ap (Fig. 2) is used for setting the fl oor attachment to brushing (for smooth fl oors),
or to smooth vacuuming (for carpets).
ACCESSORIES
1. Slotted nozzle with a brush
The slotted nozzle adapter is used for vacuuming the places that are diffi cult to access, such as radiators, slots, corners,
pedestals, spaces between upholstery, and others.
2. Upholstery nozzle
This upholstery nozzle attachment can be used for smaller upholstered areas.
3. Nozzle for wooden fl oors
This nozzle, with a brush made of horsehair, is designed for vacuuming wooden and fl oating fl oors.
Fig. 1
Fig. 2
APPLIANCE USE
NOTE
Before using the appliance, make sure that the fi lters and the dust collection bag are properly positioned and mounted.
Unwind the supply cable length you need. The yellow mark on the supply cable indicates the optimum cable length. Do
not unwind the supply cable beyond the red mark!
1. Adjust the power controller to the minimum setting.
2. Insert the plug into the electrical socket.
3. Press the ON/OFF switch to start the appliance.
4. Set the suction power you need by using the power controller.
5. After you have stopped vacuuming, switch off the appliance and disconnect it from the electrical socket.
