48
EN
VP4201
EMPTYING THE DIRT CONTAINER
1. Ensure that the vacuum cleaner is off.
2. Press the dirt container release button and separate the container from the main body of the vacuum cleaner with
the nozzle facing downwards (Fig. 9).
3. Make sure the nozzle is still pointing downwards and pull out the filter (Fig. 10).
4. Empty the contents of the dirt container into the municipal waste bin.
5. Replace the filter and push the dirt container into the main body until it clicks into place.
FILTER CLEANING
1. Remove the filter located next to the dirt container.
2. Remove the plastic filter cover - grasp the plastic cover and filter and turn it counter-clockwise.
3. Remove excess dust from the filter cover with a soft and clean brush.
4. Rinse the filter under running water. You can also use a non-abrasive detergent.
5. Allow the filter and cover to dry for 24 hours. Before assembling the filter, make sure that it is completely dry.
6. Replace the filter cover - grasp the plastic cover and filter and turn clockwise until the filter clicks into place.
REMOVING AND CLEANING THE MAIN BRUSH
1. To remove the main nozzle from the rod vacuum cleaner, press the release button and release the nozzle from the
main unit.
2. Turn the nozzle upside down.
3. Using a small coin, turn the lock counter-clockwise (Fig. 11).
4. Release the plastic cap from the nozzle (Fig. 12).
5. Pull the brush out of the nozzle.
6. You can now remove tangled hair, etc. from the brush. If necessary, use scissors to remove the hair, but be careful
not to cut the bristles of the brush.
7. Once the brush is cleaned, reattach it - insert the star-shaped end (Fig. 13).
8. Then insert the other, square end of the brush.
9. Put on the plastic cover, hold the top and turn the lock clockwise to lock it in place
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
STORING THE VACUUM CLEANER
The vacuum cleaner can be securely hung using the wall mount that comes with the product. This will prevent the
product from tipping over and getting damaged.
1. Choose a suitable place in your home where you want to hang the vacuum cleaner.
2. Mark the desired position of the screw hole on the wall with a pencil. We
recommend hanging the vacuum cleaner so that it is above the floor.
3. Use a wall mount that is suitable for your type of wall.
4. Screw the mount to the wall in the direction shown in figure 14.
5. Hang the product on the wall mount when not in use.
Warning
The vacuum cleaner is equipped with a hook, which is located on its back. You can
hang a slotted nozzle on this hook to avoid losing it.
SERVICE CENTRE
Extensive maintenance or repair, which requires access to internal parts of the product, has to be performed by
a qualified service centre.
ENVIRONMENTAL CONCERNS
•
Packaging materials and old appliances should be recycled.
•
Packaging materials may be disposed of as sorted waste.
•
Dispose the plastic bags made of polyethylene (PE) of as sorted waste.
Recycling of the appliance at the end of its lifespan:
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used
electrical and electronic appliances (Waste Electrical and Electronic Equipment - WEEE). The symbol
on the product or on its packaging indicates that this product may not be treated as household
waste. Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which could otherwise
be caused by inappropriate waste handling of this product. The disposal of such material has to be
done according to the recycling regulations. For more detailed information about recycling of this
product, please contact your local council, your household waste disposal service or the shop where
you purchased the appliance.
If the appliance contains an accumulator or a battery cell, these components contain substances which, may be
harmful to the environment when disintegrated. Before disposing of the appliance or replacing the accumulator or
the battery cell, it is necessary to remove the original component and hand over to a suitable collection point.
CAUTION!
Accumulator or battery cell:
• Do notthrow into a fire!
• Never disassemble!
• Nevershorten the wires!
If leakage occurs when the accumulator or battery cell is damaged, the electrolyte is of an alkaline character. If the
electrolyte gets on your skin, wash it gently with soap and water and seek medical attention.
The product meets all the necessary requirements of the EU directives applicable to the specific
product.
Changes in text, design, and technical specifications are subject to change without prior notice and we reserve the
right to change them.
Fig. 14
