Concept2 Titanium TI100, Инструкция по установке и эксплуатации

Страница: 23 / 30

Page 23 of 30
Menu Item Sub-menu item Delivery setting
Description
Installer Code 1993
Set the installer access code from 0000 to 9999 by selecting each digit and adjusting from
0-9.
Menu Timeout 30 min
Set the time between 0 and 99 minutes in 1 minute intervals that the menu will stay open
before reverting to the “Date and Time” screen.
DHCP On
IP 192.168.010.10
Read only if DHCP = "On". Adjustable by digit. System must be restarted using the in
menu command to register a change.
Subnet Mask 255.255.255.000
Adjustable by digit. System must be restarted using the in menu command to register
a change.
Gateway 192.168.002.001
Adjustable by digit. System must be restarted using the in menu command to register
a change.
TFTP Update IP 080.112.203.006
Adjustable by digit. System must be restarted using the in menu command to register
a change.
SmokeNet IP 192.168.002.199
Adjustable by digit. System must be restarted using the in menu command to register
a change.
SNMP Username Default
Allows a limited function set to become available to a remote user (i.e. security manager or
remote fault monitoring centre). Select “ConceptSSM” to enable.
Update Firmware
Contacts the TFTP Update Server, and downloads and deploys a new firmware set if one
is available.
Restart System
Restarts the system. This must be done in order for a change to the networking
settings to take effect.
History Limit Long
Sets the length of the event history that can be viewed in the Main Menu. Cn be set to
“Short” (25 items) or “Long” (1000 items).
Fluid Replenish
Resets the fluid timer if the Smoke Screen uses an indirectly monitored fluid system, ie a
bag.
Reset Settings
Defaults the system to factory settings (NB: These may be different to delivery
settings)
Installer system monitor menu.