Possible defects
• Only a qualifi ed technician may repair the unit. The unit shall be disconnected from the mains during repairs and
other interventions. Switch off the circuit breaker, or disconnect the plug of the supply cable.
• When disconnecting the unit from the wall outlet, never pull the power cord. Grasp the plug and disconnect it by
pulling.
Failure to follow the manufacturer‘s instructions may lead to refusal of warranty repair.
INSTALLATION
Gas supply connection
• Only authorized personnel can install the connection!
• The gas supply installation must comply with the ČSN 38 6441 and ČSN 38 6460 standards.
• Prior to the installation the user has to obtain approval from the local gas authority to connect the gas appliance
to the gas service pipe.
• For propane-butane or bottled propane gas the installation must comply with the ČSN 38 6460 standard.
• Check whether the gas supply distribution matches the values marked on the rating plate.
Connecting to the electric power source
• Only authorized personnel can install the connection!
• Check whether the mains voltage and current protection correspond to the values on the rating plate. Use wall
outlets with safety pin.
• Where the appliance is not supplied with power supply cable with a plug, the line must have a switch or a circuit
breaker, with a disengaged contact distance min. 3 mm.
• The supply cable plug or the circuit breaker have to be freely accessible even after the installation of the unit.
• Do not use adapter plugs, connectors or extension cables. They could create a risk of fi re due to overheating.
• The electrical safety of the unit can only be guaranteed if the protective terminal of the unit is connected to the
protective conductor of the mains.
• The manufacturer bears no responsibility for damage caused to people or objects as a result of a missing or bad
protective connection.
• The power cord must be located so that it does not come into contact with hot parts of the unit!
• When the unit is connected to a terminal box or electric power distribution terminal, follow the colour marking or
description of individual conductors.
• After
fi xation of the ends of the wires under the heads of the screws in the terminal box secure the cord with a clip
against pulling out.
53
SVK 8090
EN
Содержание SVE 8090
