Concept2 MNV7760ds, Руководство пользователя

Страница: 140 / 154

140
EN
MNV7760ds
Cleaning the control panel and the surface of appliance
• Use only a soft damp cloth for cleaning.
• Do not use rough and sharp objects (e.g. steel wool) or aggressive detergents.
• Do not allow water to come in contact with the door lock of the appliance.
• To clean the control panel do not use a spray cleaner. It may cause damage to the door lock and electrical parts of
the appliance.
• Some paper towels can scratch the stainless steel of the control panel.
Cleaning the door of the appliance
• To clean the edges around the door, use only a soft damp cloth.
• Do not use any spray cleaners, they may damage the door lock and electrical parts of the appliance.
Frost protection
If you are not going to use the appliance for a longer period of time or to place the appliance in places with low
temperatures, it is necessary to follow these steps:
1. Unplug the appliance from the mains.
2. Close and disconnect the water inlet hose from the water supply.
3. Dismantle the inlet hose and drain water from the hose and the dishwasher. To capture the water, you can use
a shallow container e.g. basin.
4. Reconnect the inlet hose to the dishwasher.
5. Remove the filter system and drain/wipe the remaining water (using for example a sponge).
Note:
• If there is ice and the dishwasher cannot be turned on, contact the service centre.
Note:
Do not over tighten the filters. Reassemble the filters in the correct order, otherwise coarse dirt may enter the system
and cause clogging. Never use the dishwasher without the filters inserted properly. Improper filter placement can
reduce the performance of the appliance and damage dishes and cutlery.
Properly secured filter Poorly secured filter Poorly secured filter