Concept2 MNV3660, Руководство пользователя

Страница: 153 / 172

153
EN
MNV3660
Adding dishes to the dishwasher during the running washing program
1. Press button (10) to pause the program.
2. Open the door slightly to pause the running washing program. Wait until the spray arms are completely stationary.
3. Add the dishes into the dishwasher and close the door. The washing cycle will continue after a few seconds.
4. Press button (10), the washing cycle will continue after a few seconds.
Caution!
Be careful while opening the door of the appliance, a large amount of water vapour can be released or hot water can
spurt. Hot water with the detergent can be of a chemically aggressive nature and may have detrimental effects on
your skin or furniture.
CLEANING AND MAINTENANCE
Regular maintenance and inspection prevent malfunctions. To maintain a perfect appearance of the interior of the
dishwasher, we recommend using a special dishwasher cleaner once every 4–6 months.
• Check the spray arms and make sure there are no deposits of fat and lime. If deposits occur, fill the detergent
dispenser with the detergent and start the washing program on the highest set temperature.
• Wipe the door sealing with a damp cloth regularly to remove any deposits.
• Check the indicator of the amount of the regenerating salt and refill the container if needed.
• Check the indicator of the amount of the rinse aid and refill the container if needed.
Filter system
The filter protects and prevents larger food remains or other objects getting
to the water pump. Larger objects can clog the filter, in this case it is necessary
to clean the filter.
The filter system (Pic. 10) consists of a main filter (1), a coarse filter (2) and
a fine filter (3).
Main filter (1)
• Food remains that are stuck in this filter will be washed away by the lower spray arm.
Course filter (2)
• Larger pieces of food and objects (pieces of bones, glass, etc.), that could block the drain, are filtered in the
coarse filter. To remove the coarse filter, gently pull the handle upwards and remove the filter.
Fine filter (3)
• It filters smaller pieces and prevents them from creating deposits.
Note:
• For best results clean the filter regularly. We recommend cleaning the filter after each washing cycle.
• Take out the filter, remove any food residues and run it under the tap.
• Put the filter back in its place after cleaning.
Caution!
Never use the appliance without the filter system inserted properly. Improper placement of the filters can lead to
reduction of the washing effectiveness and may cause damage to dishware and cutlery.