Concept Smoke Screen Sentinel S100, Инструкция по установке и эксплуатации

Страница: 27 / 36

26
Servicing 8
8.1 LCD LIVE STATUS INDICATIONS
The Smoke Screen provides ‘Live Status’ indications on the LCD to give a quick overview of the current
condition of the machine. The indications have the following meanings:
Top Line (Outputs):
Indication Meaning Explanation
TS Temp Status Fault
The Smoke Screen heater block is not at operating temperature, and it is not
ready to activate or there is a Heater fault.
V Verify Smoke The Smoke Screen is active / pump running.
M Mains Fault The Mains Power input has failed.
B Battery Fault The batteries are not fitted or are switched off or there is a charging fault.
E Empty Fluid The Swift-Fit is empty (Smoke Screen will not produce smoke).
L Low Fluid The Swift-Fit fluid level is less than 50%.
TI Tamper Internal The Tamper Output is giving a tamper alarm.
Bottom Line (Inputs):
Indication Meaning Explanation
S Set The Set input is in an active state.
A Alarm The Alarm input is in an active state.
Ho Hold-off The Hold-off input is in an active state.
PA Panic The Panic input is in an active state.
Sm Service Mode The Service Mode Dip switch is selected on.
ES Energy Save Mode Energy Save Mode is enabled.
Example:
The codes on the LCD screen shown above indicate the following live status:
Top line:
E, L and TI are in an alarm state - the fluid level is empty and there is a tamper.
TS, V, M and B are normal - the Smoke Screen is not making fog, the mains and battery are okay.
Bottom line:
Set and Alarm are in an alarm state and the Smoke Screen is in Service Mode.
The Hold-off and Panic are restored, and ESM is disabled.