Concept Pro VXH960-16, Руководство пользователя

Страница: 57 / 124

54
Alarm Sensor
You can confi gure the settings of the alarm sensor and specify the operation
of the sensor if an event occurs.
1. From <SYSTEM SETUP > <EVENT>, select <ALARM SENSOR >
2. Use the [
pqtu
] buttons on the remote control or use the
mouse to specify the sensor input method and operation.
> NAME: You can specify the name of the alarm sensor.
> OPERATION: You can specify the type of the alarm sensor.
- N/O (Normal Open): Normally the sensor is left Open. If the
sensor switches to Close, an event will be triggered.
- N/C (Normal Close): Normally the sensor is left Close. If the
sensor switches to Open, an event will be triggered.
> LINKED CAMERA: Set the camera to sync with the alarm sensor
if it is triggered.
If you have set the alarm recording and the sensor detects the
recording, all synchronized cameras will start alarm recording.
> ALARM OUTPUT: Specify the alarm output channel if it is
detected by the alarm sensor. The alarm will be output to the
specifi ed channel.
> Specify the output of the buzzer if an alarm is detected by the
alarm sensor
> Select to display the video popup if an alarm is detected by the
alarm sensor. If there exist multiple <LINKED CAMERA>, the video
popup will be displayed in the maximum split mode
> Select to display the OSD popup message if it is detected by the
alarm sensor.
> Select to send an email if detected by the alarm sensor.
> Select to send a notifi cation to an FTP site if detected by the alarm
sensor.
3. To apply the change, click <APPLY> in the bottom of the screen.
4. When done, press the [EXIT] button on the remote control or click
<CLOSE> in the lower screen. The confi rmationmessage appears and
you will return to the previous menu.
Event Setup
System
Settings