Make sure the lens’ are in good condition. It’s recommended to replace the units if
there are any damages or severe scratch.
Make sure the fixture is operated by qualified personnel who knows the fixture before
using
Keep the original packages for if any second shipment is needed.
Don’t try to change the fixtures without any instruction by the manufacturer or the
appointed repairing agencies.
It is not in warranty range if there are any malfunctions from not following the user
manual to operate or any illegal operation like shock short circuit, electronic shock,
lamp broke, etc
5. Mounting And installation
Cautions: For added protection mount the fixtures in areas outside walking paths,
seating areas, or in areas were the fixture might be reached by unauthorized
personnel.
Before mounting the fixture to any surface, make sure that the installation area can
hold a minimum point load of 10 times the devices’ weight.
Fixture installation must always be secured with a secondary safety attachment, such
an appropriate safety cable.
Never stand directly below the device when mounting, removing, or servicing the
fixture from a ceiling, or set on a flat level surface. Be sure this fixture is kept at least
1.5m(1.5ft) away from any flammable materials (decoration etc).
Always use and install the supplied safety cable as a safety measure to prevent
accidental damage and/or injury in the event the clamp fails.
Mounting Points: Overhead mounting requires extensive experience, including
amongst others calculating working load limits, a fine knowledge of the installation
material being used, and periodic safety inspection of all installation material and the
fixture. If you lack these qualifications, do not attempt the installation yourself