D. No response to the sound
1.
Make sure the unit does not receive DMX signal
2.
Check microphone to see if it is good by tapping the microphone.
9. Maintenance and Cleaning
The following points have to be considered during the inspection:
1)
All screws for installing the devices or parts of the device have to be tightly
connected and must not be corroded
2)
There must not be any deformations on the housing, color lenses, fixations and
installation spots (ceiling, suspension, trussing)
3)
Mechanically moved parts must not show any traces of wear and must not rotate
with unbalances
4)
The electric power supply cables must not show any damage, material fatigue or
sediments
Further instructions depending on the installation spot and usage have to be adhered
by a skilled installer and any safety problems have to be removed
In order to make the lights in good condition and extend the life time. We suggest a
regular cleaning to the lights
1)
Clean the inside and outside lens each week to avoid the weakness of the lights due
to accumulation of dust.
2)
Clean the fan each week.
3)
A detailed electric check by approved electrical engineer each three month, make
sure that the circuit contacts are in good condition, prevent the poor contact of circuit
