Conair TrueFeed, Руководство пользователя

Страница: 24 / 47

When the Regrind mode is selected feeding can be started or stopped. Regrind configurations can also be
done in this mode under the CONFIGURATION menu.
To switch between Regrind and Color modes, go to the SELECT MODE menu and select “YES or “NO”. In the
Color mode all the Color configurations can be done. In the Regrind and Colors modes, material calibration/
selection (MATERIAL menu) and loadcell calibrations can be done.
All production settings can be done from the PRODUCTION menu in Regrind mode.
There are two ways to operate a Dual TrueFeed:
1. Without a grinder connected to the machine.
2. With a grinder connected to the machine (closed-loop)
1 Without a grinder connected to the machine.
If no grinder is connected and storage bins are used to load Regrind:
Select ME as the hopper loader in CONFIGURATION menu.
The filling of the hopper will work like a normal ME hopper loader system.
The Regrind system will feed to the Regrind% Setpoint set in the Production menu.
2 With a grinder connected to the machine (closed-loop).
Go to the CONFIGURATION menu
Select GR as hopper loader for the grinder settings
The following two additional settings will be visible:
o
HL = High level of the Regrind hopper. This is the total weight of regrind material if the hopper is
filled to its maximum.
(For example, the bulk density of used of Regrind = 0.6 kg/dm3 * 6 dm3 hopper = 3600 gram or
go to the Weight Check menu, reset the weight and fill the hopper to its maximum and read the
object weight and enter this value in as HL.)
o
Lvl4 = Maximum Regrind feeding percentage.
This value will be added to the Regrind % setting in Production screen.
(Default is 20%)
For example the Regrind % to be added is 20%, then the max Regrind% is 40% with the default value of Lvl4 is 20%. If this value is set to 0%, the
maximum Regrind % will be 20%
20 Dual Feed TrueFeed Manual