Conair Theralief TN100, Инструкция по эксплуатации

Страница: 14 / 20

Guidance and manufacturer’s declaration – electromagnetic immunity
Emission test IEC 60601 test level Compliance level Electromagnetic environment – guidance
The device is intended for use in the electromagnetic environment specified below. The user of the device
should assure that it is used in such an environment.
NOTE U
T
is the a.c. mains voltage prior to application of the test level.
Electrostatic
discharge (ESD)
IEC 61000-4-2
Electrical fast
transient/burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Voltage
dips, short
interruptions
and voltage
variations on
power supply
input lines
IEC 61000-4-11
Power
frequency
(50Hz/60Hz)
magnetic field
IEC 61000-4-8
Floors should be wood, concrete or
ceramic tile. If floors are covered with
synthetic material, the relative humidity
should be at least 30%.
Mains power quality should be that
of a typical commercial or hospital
environment.
Mains power quality should be that
of a typical commercial or hospital
environment.
Mains power quality should be that of a
typical commercial or hospital environment.
If the user of the device requires continued
operation during power mains interruptions,
it is recommended that the device be
powered from an uninterruptible power
supply or a battery.
Power frequency magnetic fields should
be at levels characteristic of a typical
location in a typical commercial or hospital
environment.
±6 kV contact
±8 kV air
±2 kV for power
supply lines
±1 kV for input/
output lines
± 1 kV line(s) to
line(s)
± 2 kV line(s) to earth
3 A/m 3 A/m
±6 kV contact
±8 kV air
±2kV for power
supply lines
±1 kV differential
mode
<5% U
T
(>95% dip in U
T
)
for 0.5 cycle
40% U
T
(60% dip in U
T
)
for 5 cycles
70% U
T
(30% dip in U
T
)
for 25 cycles
<5% U
T
(>95% dip in U
T
)
for 5 sec
<5% U
T
(>95% dip in U
T
)
for 0.5 cycle
40% U
T
(60% dip in U
T
)
for 5 cycles
70% U
T
(30% dip in U
T
)
for 25 cycles
<5% U
T
(>95% dip in U
T
)
for 5 sec