Conair Theralief TN100, Инструкция по эксплуатации

Страница: 10 / 20

DIRECTIONS FOR USE
ELECTRODE PAD:
1. Clean and dry skin thoroughly prior to each application of electrode pad. Pad will not stick well if lotion,
makeup, or dirt is left on the skin.
2. Do not turn the Electronic Pulse Stimulator on before applying the electrode pad to the skin.
3. Snap the pad to the control unit (white side facing the controller).
4. Apply the pad with the control unit firmly on the skin.
WRAP:
While the electrode pad adheres well to many areas of the body, there are some
areas, such as forearms, wrists, knees, ankles, etc, that are smaller and more
curvy. We suggest using the wrap when you are treating those areas. It will hold
the pad comfortably and securely in place, even when you move around.
1. Snap the pad onto the wrap (white side of the pad facing the smooth side of the wrap).
2. Snap the control unit onto the other side (the soft side) of the wrap.
3. Press the pad firmly against your skin in the treatment area and secure the wrap with the elastics wrapped
around your body part (for instance, your knee). Then adhere the part of the elastics against the fuzzy side
of the wrap.
4. Follow directions (STEP 4, etc.) above.
REMOVAL AND STORAGE
1. Turn the device off before removing the electrode pad from your skin.
2. Lift at the edge of the electrode pad and slowly peel.
3. Replace clear backing to protect the gel coating.
4. When not in use, store the electrode pad in a resealable plastic bag in a cool place, out of direct sunlight.
RECOMMENDED PRACTICE
• Start from the lowest intensity and gradually adjust the intensity to a comfortable level on a scale
from 1 to 20.
• Good skin care is important for comfortable use of the device. Be sure the treatment area is dry and
clean of dirt and body lotion.
• Keeping the electrode pad covered with the clear backing after use will extend its lifespan. The electrode
pad is disposable and should be replaced when it loses its adhesiveness. To purchase additional electrode
pads, please contact Conair Corporation at 1-800-3-CONAIR.