Conair Theralief TN100, Инструкция по эксплуатации, Страница: 12 / 20

TROUBLESHOOTING
If your device is not operating properly, please check below for common problems and suggested solutions.
If the recommended action does not solve the problem, please contact Conair at 1-800-3-CONAIR.
STIMULATION IS WEAK OR NONEXISTENT
• Be sure skin is clean and pad is firmly attached to skin.
• The battery is low and needs to be charged.
DEVICE DOES NOT TURN ON
• Check if battery is low and needs to be charged.
• Device must be applied to skin to operate. The device will not operate unless the electrode pad is making
contact with the skin.
ELECTRODE PADS ARE NOT STICKY
• The pads will lose adhesiveness over time with repeated use. You can try applying one or two drops of
water to the area where you are trying to stick the pad. If the moisture does not help to make the pad
adhere better, you will need to order a replacement. You can order a replacement at www.conair.com or
call Conair for replacements at 1-800-3-CONAIR.
SKIN TURNS RED
• Stop treatment and move pads to another area.
• If problem persists, stop using the device and contact your physician.
ELECTROMAGNETIC COMPATIBILITY
1. This product needs special precautions regarding electromagnetic compatibility (EMC) and needs to be
installed and put into service according to the EMC information provided. This unit can be affected by
portable and mobile radio frequency (RF) communications equipment.
2. Do not use a mobile phone or other devices that emit electromagnetic fields, near the unit. This may result
in incorrect operation of the unit.
3. Caution:
This unit has been thoroughly tested and inspected to assure proper performance and operation!
4. Caution: This machine should not be used adjacent to or stacked with other equipment: If adjacent or
stacked use is necessary, this machine should be observed to verify normal operation in the configuration
in which it will be used.