Conair Carousel Plus W Series, Руководство пользователя

Страница: 61 / 193

4
O
p
e
ra
ti
o
n
C o n t r o l F u n c t i o n D e s c r i p t i o n s - R W
C o n f i g u r a t i o n
( c o n t i n u e d )
Hopper Comms (Communications) screen
To access the Hopper Comms screen:
1
Press the Settings button from the Home screen.
2
Press the Hopper Setup button .
3
Press the Hopper Comms button .
The Hopper Comms screen provides the user with the ability to enable or disable communi-
cations to the hopper heater(s).
To enable communications to a hopper heater:
1
Press the Enable button beside the hopper heater you would
like to enable.
The button will illuminate green. If
communications are successful, the LED beside the button will
change from grey to green.
2
Enable communications to any other hopper heaters you
would like to enable.
NOTE: Proper login is
required to change
these settings.
✐
(continued)
NOTE: The ID # refers to the RS-485 Modbus ID address.
This number will never change. The text “16c Hopper
Names” will change to whatever name you change it to in
the hopper name screen.
See Operation: Control Function
Descriptions - RW Configuration, Hopper Names screen.
✐
O p e r a t i o n l 4 - 2 7