The Conair A1 and W1 Portable Chillers can be used any-
where a reliable source of process cooling water - with stable
temperature control - is required.
These portable chillers are available for cooling injection
molding, blow molding, thermoforming, extrusion, air com-
pressors, metal plating, anodizing, degreasing, heatset/web
offset printing presses, and dryer after-coolers.
Roll the air-cooled condenser models next to the heat source
connect it and plug it in. They can operate almost anywhere.
The water-cooled condenser models require a source of con-
denser water. Normally used in conjunction with a recirculat-
ing evaporative cooling tower system, the units have slightly
better operating energy efficiencies.
T
YPICAL
A
PPLICATIONS
UGH017/0500
Series 1 Portable Chillers, PLC Control
D
ESCRIPTION
2-3
L
IMITATIONS
Conair Series 1 Portable Chillers are designed to provide
chilled water for industrial applications requiring 24-hour-a-
day performance. Units are self-contained and easy to install
and maintain. Choose the Conair Series 1 Portable Chillers
based on the cooling load and the capacity of the unit. Pick
your Conair Series 1 Portable Chillers based on:
●
Cooling load
Choose a portable chiller that has 20% more capacity than
the process load.
●
Location
Choose a water-cooled model if the unit will be located in
an air-conditioned area and a source of condenser water is
readily available (i.e. cooling tower water). Do not locate
either portable chiller model outside unless the unit is
specially modified.
●
Temperature
The portable chiller has a standard setpoint temperature
range of 20 °F (7 °C) to 70 °F (21°C).
Use this information as a general guide. Consult your Conair
representative for assistance when choosing a Conair Portable
Chiller.
