Comtrol interchange vs1000, Руководство по установке и настройке

Страница: 28 / 46

28 NIAS/MPR Installation and Configuration
Novell NetWare
4. Move the cursor to
Modem/DCE Type
and press
Enter
.
The list of available PPP Modem/DCE Device Types displays:
5. Select the modem type attached to the port and press
Enter
.
6. Move the cursor up to Interface Speed and press
Enter
.
The list of interface speeds displays.
7. Select one and press
Enter
.
8. Press Esc to exit the PPP Network Interface Configuration screen.
You are asked if you want to save your changes. Select
Yes
and
press
Enter
.
You are returned to the Network Interfaces window. The Media
type should be
PPP
and the port Status should be
Enabled
.
9. Repeat this process as needed for all ports on the system. When
you are done, press
Esc
to exit to the Internetworking
Configuration menu.
Configuring WAN Call Destinations
Follow these steps to create WAN Call Destinations:
1. From the Internetworking Configuration menu, select
WAN Call
Directory
.
The list of Configured WAN Call Destinations is displayed.
2. Press Insert to create an entry.
3. Enter the New Call Destination Name and press
Enter
.
4. Select one supported wide-area medium (for example,
PPP
) and
press
Enter
.
The PPP Call Destination Configuration screen is displayed.