Comtrol interchange vs1000, Руководство по установке и настройке

Страница: 13 / 46

Overview 13
Novell NetWare
Overview
VS-Link for Novell (AIOVS1.NLM) is a NetWare Loadable Module™
(NLM™) that provides the software interface between AIO and the
VS1000 virtual server. This includes:
• All enqueuing and dequeuing of serial data.
• Communicating as a protocol stack to an Ethernet II driver.
• Modem control signal functioning (excluding ring indicator).
• Hardware and software flow control.
VS-Link works with the following operating system releases:
Note: VS-Link also supports third-party products such as Computer
Associates
®
FAXserve™ and Funk WanderLink
®
. If you use
such a product you may not need NetWare Connect or MPR; for
more information see your application documentation.
VS-Link can support up to eight VS1000/VS1100 units networked to
one Ethernet adapter in one NetWare server. (All communication is
handled through a single Ethernet II driver, so all VS1000/VS1100
units must be connected to the same Ethernet adapter.) Each VS1000
can support three VS1100 expansion units: different combinations of
VS1000 and VS1100 units can be controlled by a single NetWare
server, provided the total number of units does not exceed
8
and the
total number of serial ports does not exceed
128
.
Baud rates from 75 to 230.4 Kbps are supported on all ports. Actual
usable rates may vary, depending on operating system limits.
Note: You can obtain on-line help by entering
load AIOVS1 ?
Table 2. Novell Operating System Releases Supported
Operating System Feature
NetWare 3.12
MPR 3.1A or higher and/or NetWare Connect
2.0.30 or higher
NetWare 4.1x
MPR 3.1A or higher and/or NetWare Connect
2.0.30 or higher
IntranetWare I NIAS (Support Pack V1.0)