Comtrend Corporation WAP-EN1750R Скачать руководство пользователя страница 10

Страница: 10 / 88

I-6. Safety Information

In order to ensure the safe operation of the device and its users, read and act

in accordance with the following safety instructions.

1. The access point is designed for outdoor use only; do not place the access

point indoors.

2. Do not pull any connected cable with force; carefully disconnect it from the

access point.

3. Handle the access point with care. Accidental damage will void the

warranty of the access point.

4. The device contains small parts which are a danger to small children under

3 years old. Please keep the access point out of reach of children.

5. Do not place the access point on paper, cloth, or other flammable

materials. The access point may become hot during use.

6. There are no user-serviceable parts inside the access point. If you

experience problems with the access point, please contact your dealer of

purchase and ask for help.

7. The access point is an electrical device and as such, if it becomes wet for

any reason, do not attempt to touch it without switching the power supply

off. Contact an experienced electrical technician for further help.

8. If you smell burning or see smoke coming from the access point or power

adapter, then disconnect the access point immediately, as far as it is safely

possible to do so. Call your dealer of purchase for help.

9. Operating temperature is -30°

～

+70°.

Содержание WAP-EN1750R

























































































Результаты поиска

Содержание WAP-EN1750R

Отзывы:

Похожие инструкции для WAP-EN1750R

Бренды по названию

Популярные бренды

Comtrend Corporation WAP-EN1750R, Руководство пользователя

Результаты поиска

Содержание WAP-EN1750R

Отзывы:

Похожие инструкции для WAP-EN1750R

Бренды по названию

Популярные бренды