Comtrend Corporation CT-6382T, Руководство пользователя

Страница: 30 / 138

Chapter 5 Quick Setup
The Quick Setup option will not be displayed in the menu bar if a WAN is configured.
The Quick Setup allows the user to configure the ADSL VoIP IAD for DSL connectivity
and Internet access. It also guides the user through the WAN network setup first
and then the LAN interface setup. You can either manually customize the VoIP IAD
or follow the online instruction to set up the VoIP IAD.
The CT-6382T ADSL VoIP IAD supports the following five network operating modes
over an ATM PVC WAN interface.
PPP over Ethernet (PPPoE)
PPP over ATM (PPPoA)
MAC Encapsulated Routing (MER)
IP over ATM (IPoA)
Bridging (default)
The following configuration considerations apply:
The WAN network operating mode operation depends on the service provider’s
configuration on the Central Office side and Broadband Access Server for the
PVC
If the service provider provides PPPoE service, then the connection selection
depends on whether the LAN-side device (typically a PC) is running a PPPoE
client or whether the CT-6382T is to run the PPPoE client. The CT-6382T can
support both cases simultaneously.
If some or none of the LAN-side devices do not run PPPoE client, then select
PPPoE. If every LAN-side device is running a PPPoE client, then select Bridge.
In PPPoE mode, CT-6382T also supports pass-through PPPoE sessions from the
LAN side while simultaneously running a PPPoE client and non-PPPoE LAN
devices.
NAPT and firewall are always enabled when PPPoE /PPPoA mode is selected, but
they can be enabled or disabled by the user when MER or IPoA is selected,
NAPT and firewall are always disabled when Bridge mode is selected.
Note: Up to eight PVC profiles can be configured and saved on the flash memory. To
activate a particular PVC profile, you need to navigate all the Quick Setup pages
until the last summary page, then click on the Finish button and reboot the system.
29