MNC-0500-026
20 of 32
Revision G
Amplifier Communication and Protocol, Rabbit CPU
Miscellaneous Setup
Command Byte:
‘P’
Query:
P/?
Returns: P/nXXXX where XXXX is the line slope value; n is the current sub-
band number for that slope.
Examples:
Query:
P/?
Returns: P/nXXXX where n is the current sub-band; XXXX is the slope for
that sub-band.
Query:
P/?n
/ = Linearizer Slope
n = sub-band number (1-4)
Examples:
Query: P/?1 (Same query fo rsub-bands 2 through 4)
Returns: P/1XXXX where 1 is the first sub-band; XXXX is the slope fo rsub-
band 1. The return meaning is the same for sub-bands 2 through 4.
Query:
PC?
Returns:
PCx
C = WG Switch mode. x = mode
0 = No Waveguide Switch
1 = One WG Switch for ONE-FOR-ONE redundant mode
2 = One WG Switch for ONE-PLUS-ONE redundant mode
3 = Two WG Switches for ONE-FOR-ONE plus a load switch
4 = 1:2 redundant system with two waveguide switches.
T = Waveguide Arc Test
S = Summary Fault Test
Query:
PBCA?
Returns: PBCAxx.x, where xx.x is the IF attenuation in dB.
Query:
PBCP?
Returns: PBCPxx.x, where xx.x is the IF input power to the Block Up
Converter in dBm.
Query:
PBCT?
Returns: PBCTxx.x, where xx.x is the internal temperature of the Block Up
Converter in degrees C.
Query:
PEX<?>
E = Ethernet
X = mode or parameter you wish to query.
D? = Interface Up/Down status.
I? = IP Address
N? = Netmaks
M? = MAC Address
U? = Interface Up/Down status.
Examples:
Query:
PED?
Returns: PEDX where X = 1 if interface is Down (disabled) or 0 if interface is
Up (enabled.)
Query:
PEU?
Returns: PEUX where X = 0 if interface is Down (disabled) or 1 if interface is
Up (enabled.)
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
