Comtech EF Data SLM-5650B, Инструкция по установке и эксплуатации

Страница: 353 / 412

SLM-5650B Satellite Modem
Revision 2
Appendix C C–25 MN-SLM-5650B
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to
Query
Rx Buffer Size RBS= 8 bytes Command or Query.
Rx Buffer Size (in either bits or milliseconds, see RBM command),
where:
xxxxxxxx = Rx Buffer Size
Note: Commands as well as queries are not allowed when either the
GigaBit Ethernet or NP card has been selected as the current
interface type.
Example: RBS = 00000512
RBS=
RBS?
RBS*
RBS#
RBS? RBS=xxxxxxxx
(see Description
of Arguments)
ReCenter Buffer RCB= None Command only.
Forces the software to recenter the receive Plesiochronous / Doppler
buffer.
Note: This command is not allowed when either the GigaBit Ethernet
or NP card has been selected as the current interface type.
Example: RCB= (ReCenter buffer)
RCB=
RCB?
RCB*
RCB#
N/A N/A
Rx Clock Invert RCI= 1 byte Command or Query.
Invert Receive Clock in the form x, where:
0 = Normal
1 = Inverted
Example: RCI = 1 (selects Inverted RX Clock)
RCI =
RCI?
RCI*
RCI#
RCI? RCI=x
(see Description
of Arguments)
Rx Clock Source RCK= 1 byte Command or Query.
Rx Clock Source, where:
0 = Rx Satellite
1 = Internal
2 = Tx-Terrestrial
3 = External Clock (only valid with the G.703 Option Card)
Note: Commands as well as queries are not allowed when either the
GigaBit Ethernet or NP card has been selected as the current
interface type.
Example: RCK = 2 (selects Tx-Terrestrial)
RCK=
RCK?
RCK*
RCK#
RCK? RCK=x
(see Description
of Arguments)