Comtech EF Data SLM-5650B, Инструкция по установке и эксплуатации

Страница: 271 / 412

SLM-5650B Satellite Modem
Revision 2
TRANSEC Module HTTPS Interface 10–15 MN-SLM-5650B
Table 10-1. Event Log Message Types
Event Type (By order of severity – from least to worst case)
Event Type Event Description Level of Severity / User Action
Informational
Normal operational status change; e.g.,
successful password or configuration setting
change.
Minimum. Event logged is for user reference only.
Warning
Status change that the system might not
accept or expect; e.g., setting the future
passphrase without first setting the future
seed key, entering an invalid remote
command, etc.
Moderate. User should consult the pertinent
sections of this manual to troubleshoot, and then
repeat command or procedure as needed.
Minor
Error condition that the system should be
able to recover from without affecting the
operation of the system; e.g., encountering
software ‘bug’, etc.
Such events are not recorded into the
Events Log.
Moderate. User should report issues when
convenient to Comtech EF Data Customer Support.
Major
A more severe error that may indicate a
degradation of the stability of the system;
e.g., out-of-range temperature readings for
the TRANSEC Module, etc.
Maximum. User should contact Comtech EF
Data Customer Support as soon as possible to
address issue.
Critical
The most severe error level indicating that
system failure has occurred or is imminent;
e.g., memory allocation failure, OS failure,
etc.
Maximum. User should contact Comtech EF
Data Customer Support immediately to arrange
for RMA / in-factory service.
Click Clear Log to clear the event log of all messages. The event log is reset to zero entries.
Figure 10-5. Event Log Page Cleared