Comtech EF Data CDM-710G, Инструкция по установке и эксплуатации

Страница: 152 / 246

CDM-710G High-Speed Satellite Modem Revision 1
Telnet Interface MN-CDM710G
9–2
Once logged into the Telnet interface as the Administrator, the user can access the standard
remote control interface defined in
Appendix A. REMOTE CONTROL , as shown in this
example:
9.2 Caution Using Windows Telnet Client
There is a disadvantage when using Windows DOS as Telnet Client. Since Windows DOS cannot
translate a ‘\r’ to a ‘\r\n’ for the messages coming from Telnet Server, the multi-line command
response (for example,
FRW? response) will be displayed as one line, with the latter lines
overwriting the previous lines.
In order to view the full response messages, CEFD recommends using HyperTerminal configured
as Telnet Client. To do so, configure the HyperTerminal as following:
1. Connect using TCP/IP instead of
COM1 or COM2 (see example
shown at left).
2. ASCII setup: Check both the
"Send line ends with line feeds"
and "Append line feeds to
incoming line ends" options (see
example to right).