COMRADE R8, Руководство пользователя

Страница: 10 / 14

13 14
10.-ADVANCED OPERATION
10.1. -Voice Prompt
*
To turn on or turn off the voice prompt, please switch the channel knob to Channel 10,
then press [PTT] and [F] to turn on the radio.
*
To change the Chinese and English setting, please switch the channel knob to channel
15, then press [PTT] and [F] to turn on the radio.
10.2. -STUN, KILL FUNCTION
You can program the working status to control the radios in the group.
*
Remote Stun
Remote Stun function allows the control center to temporarily turn off the radios which
are illegal occupying the channels.
When the radio receive a DTMF signal with the matched Stun code, the radio will enter
Stun mode after it decoding succeed, which means the radio can't transmit but can still
receive from other radios.
Under Stun mode, the radio will exit Stun mode when it receiving a revive code from the
control center with decoding succeed or re-programmed via software.
*
Remote Kill
Remote Kill function allows the control center to disable the radios which are lost or stolen.
It prevents from information leakage.
When the radio receive a DTMF signal with the matched Remote Kill code, the radio will
enter Kill mode after it decoding succeed, then the radio cannot transmit or receive.
Under Kill mode, the radio will exit Kill mode when it receiving a revive code from the control
center with decoding succeed or re-programmed via software.
10.3. -1750Hz TONE
This function is used to awake the sleeping repeater station. Press the programmed "1750Hz
Tone" key to activate the 1750Hz Tone, press this key again to exit it.
When 1750Hz Tone is activated, press [PTT] key to transmit 1750Hz Tone first then transmit
normal signals. The receiver whom receives the 1750Hz Tone will sound Beep alert until
the 1750Hz signal disappears.
10.4. -DIGITAL FM RADIO FUNCTION
In the single reception state, press [F] switch on FM radio. After FM Radio starts, press
[F] to search FM radio. Press [MONI] for FM band switch. If press [MONI], a sound "Beep"
is heard, then FM works in 65-75.9 FM band range, at this time press [F] radio frequency
search in the range of 65-75.9MHz. If press [MONI] ,a sound "Beep, Beep" is heard, FM
works in 76-108 FM band range, at this time press [F] radio frequency search in the range
of 76-108 MHz Shutdown and restart or rotate the selector can permanently turn off the
radio.
10.5. -VOX Function
VOX means voice-operated-transmission. When VOX function is activated, the radio can
transmit without pressing [PTT] key.
On channel 1-5, press and hold the MONI and [PTT], then switch on the transceiver, thus
to activate the VOX functions ON/OFF.
*
When you turn on the VOX function on Channel 1, the VOX level will be 1 (most sensitive)
*
When you turn on the VOX function on Channel 5, the VOX level will be 5 (lest sensitive)
*
When you operate the VOX function, you must use an optional headset with microphone.