11
NARC ID CENTRAL STORAGE UNIT (CSU)
— Instructions
NARC iD Central Storage Unit
Operation
Normal Operation
The NARC iD CSU system automatically reads RFID tags
which are installed onto capsules containing controlled
substances that will be tracked with this system. Please see
the Capsule Assembly section page 9 for details on capsule
assembly. When the NARC iD CSU system is empty and no
tags are missing the LCD screen will show
SAFE IS EMPTY
.
Type a valid PIN code or present a valid card to the credential
reader to access the NARC iD CSU. (See CompX LockView
software instruction manual for information regarding adding
valid users.) Open the door and insert a tote containing RFID
enabled capsules with tags. When the door is closed, the
NARC iD CSU system will turn on and scan the box for tags.
The LCD screen will say
SCANNING DRUGS PLEASE WAIT
. It
will also show how many tags have been identified /
confirmed.
After the NARC iD CSU system has completed the scan, the
LCD will show how many tags are in the safe.
Access the NARC iD CSU system with a valid credential and
remove the tote (along with ALL tags). Close the door. The
NARC iD CSU system will scan the contents of the CSU and
the LCD will say
SAFE EMPTY XX TAGS MISSING
. (If all of the
tags were not removed, you will be immediately asked about
the reason the tag is missing, see below).
