FP-30 User’s Manual
Chapter 8 Interfacing with the hardware board (On-board connection) 84
Chapter 8
Interfacing with the hardware
board (On-board connection)
8.1
Introduction
This chapter explains how to use the adapter cable [ADP-FP30SA-CBL-S10] and program flash memory on a hardware board
using On-board connection method.
ADP-FP30SA-CBL-S10 adapter cable
For technical contents and reference circuits not described in this manual, refer to
the manual [SPI Flash Programmer FP-30 Technical Data] on our website
(
8.2
ISP connector specifications
ISP connector specifications is as follows:
Pin No.
Signal name
Input/output
*1
FP-30 internal circuit
1
SRST
Input
100
Ω
series
Open collector output
2
Vtref
Output
4K
Ω
Pull-Down
3
SCLK
Input
22
Ω
series
4
GND
-
GND
5
CS1
Input
22
Ω
series
6
SI/SIO0
Bidirectional
22
Ω
series
7
SO/SIO1
Bidirectional
22
Ω
series
8
SIO2
*2
Bidirectional
47
Ω
series
9
SIO3
*2
Bidirectional
22
Ω
series
10
CS2
*2
Input
22
Ω
series
*1
: Input/output are determined based on the hardware board side.
*2
: NC if the pins are not used on the flash memory.
Info.
ISP connector
FP-30 side ISP connector
Manufacturer : Hirosugi-Keiki Co., Ltd.
Model : FSS-41085-10
Target side applicable connector
Manufacturer : Hirosugi-Keiki Co., Ltd.
Model : PSS-410153-10
