Computex FP-30, Руководство пользователя, Страница: 14 / 18

FP-30 User’s Manual Chapter 16 External I/O functions 128
Chapter 16 External I/O functions
16.1
Introduction
FP-30 units can be controlled from External devices or can be connected in chain fashion. All adapters included with FP-30 have
been provided with Input/Output signal terminals for this purpose. Through-holes have been provided for convenient connection.
*
Use only the pins indicated by the white boxes in the picture above. Other pins are not to be used.
Group name Pin Signal name Input/Output
*1
FP-30 internal circuit
SW-OUT 1 EXSTARTOUT Output 100Ωseries CMOS open drain output
G GND
SW-IN 1 EXSTART Input 22Ωseries 4.7KΩPull -UP
G GND
STS 1 EXOK Output 100Ωseries Open collector output
2 EXNG Output 100Ωseries Open collector output
G GMD
*1
: Input/output are determined based FP-30 unit side.
The above signals can be enabled/disabled and the output pattern of EXOK/EXNG can be configured on the
[External
Input/Output settings tab]
on the Detailed settings dialog.
Do not use
Do not use
Do not use