Technical Information on SPI Flash Programmer FP-30
Oct. 15, 2019
(Second Edition)
2
■
Introduction
This document explains the interface specifications for “On-board connection” method
programming.
FP-30 has two connection methods that are used for programing flash memory:
On-board programming
SPI flash memory on a hardware boards can be programmed using this method.
The FP unit and the hardware board are connected using an adapter cable.
Off-board programming
Individual flash memory chips inserted into a socket adapter can be programmed
using this method. A variety of socket adapters for flash memory packages are
available to support this operation.
■
Applicable connector
10 pin 2.54mm pitch connector
(Hardware board connector top view)
Recommended connector
Manufacturer : Hirosugi-Keiki Co., Ltd.
Model : PSS-410153-10
※
Please refer to the pin layout and be sure to confirm how to assign the pin number.
On-board programming example using
For On-board programming, it is recommended to use the adapter cable [
ADP-FP30SA-CBL-S10
] and to use
the ISP connector on the target board.
In case of hardware boards that have already been designed/manufactured without an ISP connector, a test
clip can be used to program the flash memory.
For details, refer to [Chapter 8 Interfacing with the hardware board (On-board connection)] in the FP-30 User’s
Manual.
Flash memory to
be programmed
