Computer Associates ARB6002700WF0. ..... - BRIGHTSTOR ARCSERVE 2000, Руководство пользователя

Страница: 40 / 73

NetWare Client Agent Configuration
Configure NetWare Network Communication
To configure the NetWare client agent for communication, edit the
ASCONFIG.INI file to specify the IP address assigned to the client agent by
the system administrator. Specifying an IP address is useful in a server with
multiple IP addresses. Instead of using only the first bound address, the client
agent uses the ASCONFIG.INI file to find the IP address to use.
To edit the ASCONFIG.INI file, follow these steps:
1. From a text editor, open the ASCONFIG.INI file located in the client agent
home directory.
2. Add the following line to the NetWare Agent section of the file, specifying
the IP address that you want the client agent to use:
IPAddress = nnn.nnn.nnn.nnn
If a NetWare Agent section does not exist, create one by adding the
following line to the end of the ASCONFIG.INI file:
[NetWare Agent]
3. Save the file and exit from the editor.
4. Unload and restart the client agent.Unloading is required for changes to
the ASCONFIG.INI file to take effect. To unload the client agent, use the
NetWare client agent’s Unload & Exit menu option. Alternatively, you can
enter the following command at the server console:
unload nwagent
5. When the client agent has been unloaded, restart the client agent (that is,
reload the agent) at the server prompt by issuing the following command:
nwagent
A message appears at the server prompt, confirming the use of the IP
address specified in the ASCONFIG.INI file:
IP Address nnn.nnn.nnn.nnn from ASCONFIG.INI file will be used.
A similar message is displayed on the client agent runtime message
screen:
IP Address nnn.nnn.nnn.nnn is bound for use by NetWare Push Agent.
The client agent is now ready to service backup and restore jobs using the IP
address specified in the ASCONFIG.INI file.
40 Client Agents Guide