2. Door is open,
3. Trunk is open,
4. Vehicle is running and/or
5. Ignition Wire being powered.
The LCD in the remote displays 5 different Modes
Button I + II
Press 1/2 sec. Mute mode (ON/OFF)
ON, when SPK is not shaded in the LCD.
OFF, when SPK is shaded in the LCD.
Button I+III
Press 1/2 sec. Valet Mode (ON/OFF)
When Valet Mode is activated with remote, Zzz will indicate in the LCD.
Note: Valet Mode with the key will not show Zzz in the remote.
Valet Mode with KEY:
Place the key in the Ignition. Turn to ON position and then to OFF or Acc.
Three times ON/OFF(Acc) within 3 seconds. The siren will chirp and
parking lights will flash once to confirm Valet Mode.
Button II+III
Press 1/2 sec.
Car Call(Vehicle Paging System)/Pager (ON/OFF)
ON, when Car Call is shaded in the LCD.
OFF, when Car Call is not shaded in the LCD.
Remote-Pager will respond to:
1. Door/Hood
2. Trunk
3. 2nd stage Shock/Optional sensor
4. Vehicle Paging System (V.P.S.)
Button II+IV
Press 1/2 sec.
24Hr. Mode (shock sensor ON/OFF)
shock sensor ON, when 24Hr. is shaded in the LCD.
shock sensor OFF, when 24Hr. is not shaded in the LCD.
Button III+IV
Press 1/2 sec. Turbo Mode (2nd car ON/OFF)
You may control two vehicles with one remote. 1st vehicle with Turbo OFF,
and the 2nd vehicle with Turbo ON. (See Remote Learning Procedure)
ALARM TRIGGER
