Alarm will be triggered in the following ways:
1. Light Impact will trigger the 1st stage of the Shock sensor;
the siren will chirp 4 times and the parking lights will flash four times.
The 1st stage will not page the Remote-Pager.
2. Heavy impacts will trigger the system with 30 seconds of
constant siren and flashing of the parking lights. The Remote-Pager
will BEEP and a Hammer will appear and start to flash with the
parking light in the LCD.(Optional sensor will trigger the same way as
the 2nd stage of the Shock sensor).
3. If a Door is opened, the siren will go off and the parking lights
will flash for 30 seconds. Remote-Pager will BEEP and the Door and
parking lights will flash in the LCD. (Optional Hood sensor will trigger
the same way as the Door trigger).
4. If the Trunk opens, the siren will go off and the
parking lights will flash for 30 seconds. Remote-Pager
will BEEP and the Trunk and parking lights will flash in the LCD.
5. Optional Starter Kill will prevent the vehicle from staring.
TRANSMITTER LEARNING PROCEDURE
Important: Make sure the type of the door lock pulse
you need for this vehicle. Also, determine whether you
are going to program transmitter with Turbo Mode (2nd Car)
ON or OFF or ON and OFF both.
Step 1:
Put the system in Valet Mode with the KEY by
turning the key to Ignition ON and OFF three times
within 3 seconds. The parking lights will flash once
when it enters Valet Mode.
Step 2:
Once in the Valet Mode, choose one of the Lock options
within 6 seconds by pressing one of the buttons.
Button I for 1/2 sec. Single pulse lock/unlock
Button II for 2 sec. Double pulse unlock
Button VI for 1/2 sec. 2-second lock/unlock
Step 3:
To program additional remotes. Just press any Button on
the 2nd and 3rd Remotes. The system will learn up to three Remotes.
Note: Step 2 and 3 will remove any of the Remotes
that were previously programmed to the system.
