42
Setup Parameter
Values
Description
TEAR MODE
auto 1s, auto 2s,
auto 3s, auto 4s,
auto 5s, manual,
no tear/reverse
Selects the way the tear mode is performed. Selecting
auto 1s,
auto 2s, auto 3s, auto 4s,
or
auto 5s
, the printer moves
the paper in the tear-off position and back to the printing position after
the corresponding number of seconds. Selecting manual, the tear-off
is performed manually, pressing the ON LINE key. Selecting
no
tear/ reverse
, the printer does not perform the tear-off function
(this is useful, when printing on labels).
MANUAL LOADING
enabled, disabled
Selects the manual loading mode. Setting it to
enabled
the printer
loads any kind of document according to the described procedures.
Select
disabled
, when a more precise paper alignment is
necessary. With this selection it is not possible to load documents with
a width of less than 90 mm.
ALIGN MODE
fast, normal
Selects the paper alignment mode. Selecting
fast
the printer
performs less checks on the alignment, whereas, if you need a
particularly precise alignment of the documents, select
normal
.
GAP MODE
auto, fix
Selects, whether the print gap is sensed for each inserted sheet
(
auto
) or only for the first sheet after the printer power on (
fix
). The
print gap is sensed separately for the cut sheet and the fanfold paper.
AUTO EMPHASIZED
no autoEM, 0.25
mm, 0.35 mm, 0.45
mm, 0.55 mm
Selects the emphasized print mode when the loaded paper is thicker
than the selected value.
