41
Setup Parameter
Values
Description
PRINT DIRECTION
unidir., bidir.,
sw control
Selects the printing direction of the print head: unidirectional
(
unidir
.), bidirectional (
bidir
.) or selected via software (
sw
control
).
EJECT ON FF
disabled, enabled
Performs a form feed according to the selected page format
(
disabled
) or ejects a cut sheet loaded into the printer (
enabled
).
CUT SHEET EJECT
on front, on rear
Selects whether the cut sheet loaded into the printer is ejected
towards the front or the rear of the printer.
PARK MODE
immediate
manual imm.
When pressing the PARK key or receiving a park command, the
printer immediately parks the paper.
When pressing the PARK key, the printer automatically parks the
paper. When receiving a park command via software:
1. If the current page is not empty (there is printing data or paper
movement commands have been issued), a form feed is
performed.
2. The paper is moved to the tear-off position.
3. The P1, P2, P3 and P4 leds blink.
When the ON LINE key is pressed the printer parks the paper.
after tear
When pressing the PARK key or receiving a park command via
software:
1. If the current page is not empty (there is printing data or paper
movement commands have been issued), a form feed is
performed.
2. The paper is moved to the tear-off position.
3. The P1, P2, P3 and P4 leds blink.
4. When the ON LINE key is pressed the printer parks the paper
