Compuprint 4051, Руководство пользователя

Страница: 113 / 126

Options
107
Switching From Fanfold Paper to ASF
If you have been using fanfold paper and the printer receives a command to load a cut sheet
through the Automatic Sheet Feeder:
1. Park the fanfold paper: press the
SHIFT
key and then the
PARK
key to enable the PARK
function, the message
Parking paper
will be displayed.
2. Place the drive selection lever in the cut sheet position. Press the
ON LINE
key.
Inserting Manual Cut Sheets Without Removing the ASF
Follow the sequence:
•
Open the paper bins.
•
Make sure that the printer is disabled to
print.
•
Insert the cut sheet in the entry slot in
front of the first bin until it stops against
the platen. Perform the paper loading
procedure as explained before in
“
Loading Cut Sheets ” section.
•
Whenever you wish to enable again the
ASF loading, stack the paper in the bins
and close them.