Compu Pool E-Series Manual
12
8.3
Cell Module
8.3.1
The Cell Module is installed with the use of the Cell Mounting Bracket in the vertical
position with the Cell Head facing upwards. To install with the Cell Mounting
Bracket, carry out the following procedure.
01. The Cell Mounting Bracket can be
mounted to a wall or sturdy post with either
of the three faces with the four holes
(Ø0.40" / Ø10mm). Determine which
mounting option would suit the desired
plumbing configuration. Use strong screws
or bolts to fasten the Bracket to the
mounting surface.
02. With two people lift and position the
Cell Module onto the Mounting Bracket
and assemble the eight M8 screws to
firmly hold the Cell in place.
Note: To protect the Cell Module during
shipping, it will be pre-assembled to the
Mounting Bracket. The Cell Module will
need to be removed from the Mounting
Bracket to undertake this installation.
