5-1
Page Layout
<頁頁頁頁頁頁>
Chapter 5: Live View
Chapter 5: Live View
Page Layout
On the first page, you can see the basic control panel at the top and on the left-hand side, and the live video
on the right-hand side. Click on the
icon to hide or show the control panels.
Figure 5-1. Layout of LiveView page for TN900
Left control panel
– Here provides control over video recording, voice communication, Pan/Tilt and
snapshot.
Video stream selection
– You can switch between Stream-1 and Stream-2. (Stream-2 can be enabled
and configured in video settings.)
PTZ Speed
– Set the Pan and Tilt speed from a scale of 1 to 10.
Video mode selection
– Let you switch video display between single, multi, and auto scan mode.
Top control panel
– Let you adjust camera video and microphone and speaker volume.
Preset Point
– Changing the preset point allows you to change camera’s current direction to a different
one to view in a pre-defined direction. (Please configure the preset points in [Setup] > [PTZ Control])
Magnifier icon
– Click on the magnifier icon to bring up the digital zoom control window.
Live video panel –
Live video stream. Click any spot on the video window to pan/tilt. You can switch to
full-screen mode by right-clicking on the video pane and select “Fullscreen”.
Channel selector
– Select a channel from the drop-down list, or click on the arrow icon to switch to
next/previous channel. Up to 16 cameras can be added to your channel list, and using the “Multiple” vid-
eo mode allows you to monitor 4 channels at the same time.
X-axis
– Click on the bar to adjust camera’s position on the x-axis.