background image

Dear Customer: 

 
 

Thank you 

for purchasing your equipment from Component Playgrounds!!! We are proud of 

our commercial grade products made for kids of all ages & sizes, and we are confident that you 
will enjoy your equipment for many years.  

Because you have purchased a top of the line commercial grade product, you will need to 

be aware of some specific shipping requirements that may be different from shipments you 
have received in the past through other delivery companies (such as UPS), and you should 
follow the guidelines below carefully.  

1. In most cases your product will arrive via common carrier truck line directly to your 

home with curbside delivery only. This means the driver will facilitate the offloading of the 
shipment at the curb, or most reasonable place near the curb and your house. You are then 
responsible to 

have someone physically capable to help unload the product upon delivery 

and note the condition of the product as per below instructions.  

2. Your product may arrive on a pallet and upon delivery

—locate the packing list (usually 

attached to the hardware box & orange & black in color) and verify that each piece listed is with 
the shipment. 

*** Please disregard any delivery driver stated “time crunches” or “needs to 

leave quickly” and in-speck the product to your satisfaction = this is your product so 
make sure it is all there in good condition or noted properly before the driver leaves.***  

3. If there are any parts/pieces missing, note this directly on the delivery receipt 

BEFORE 

you sign 

and receive your copy of the receipt, with wording such as “missing xyz part” etc. 

Note: some shipments will have more than one pallet so check both before noting missing.  

4. Similar to #3 above, also note the condition of the pieces and if any parts have been 

damaged in shipping note this directly on the delivery receipt 

BEFORE 

you sign and get your 

copy from the driver (in particular inspect slides for damage).  

5. If your shipment appears to have damage and /or missing pieces, a freight claim must 

be fi led with the freight company w/in two business days. Component Playgrounds will assist 
you with this process if it is necessary. Contact the shipping manager toll free @ 877-530-0222 
for claims assistance.  

6. Ask your driver to sign or initial the freight slip acknowledging any damage or 

discrepancies.  

7. Get a copy of the signed delivery receipt from your delivery driver BEFORE he leaves.  
8. If you are concerned or don’t know what you should do with a certain situation 

regarding the shipment, please call the shipping manager toll free @ 877-530-0222 before the 
driver leaves.  

 
All shortages and damaged items are the sole responsibility of the carrier. You are 

responsible to notify Component Playgrounds of any shortages or damage relating to your 
shipment w/in 2 business days of receipt of your equipment. After this time, any claim for 
shortage or loss cannot be honored.  

 

Component Playgrounds cannot be responsible for replacement of any parts, 

missing or damaged, that have not been properly noted on the delivery receipt. 
Component Playgrounds cannot be responsible for damaged or missing pieces due to 
the fault of, or loss by the freight company.  

 

Thanks again & remember to tell your friends about your product from Component Playgrounds!  

 

 
 
 
 

 

Содержание PH30-10




































Отзывы: