Compex NetPassage 28G, Руководство пользователя, Страница: 82 / 185

Chapter 5 Advanced Configuration
73
CONFIGURATION : Spanning Tree Protocol
Spanning Tree Protocol is a link management protocol that provides path redundancy
while preventing undesirable loops in the network. For an Ethernet network to function
properly, only one active path can exist between two stations.
Multiple active paths between stations cause loops in the network. If a loop exists in the
network topology, the potential exists for duplication of messages. When loops occur,
some switches see stations appear on both sides of the switch. This condition confuses the
forwarding algorithm and allows duplicate frames to be forwarded.
1. Under the CONFIGURATION
command menu, click on
Spanning Tree Protocol, and you
will be brought to the following
screen.
2. Click the Enable button, followed
by Apply to allow spanning tree
protocol to be activated of the
router.
CONFIGURATION : Email Notification
The router provides this feature to notify you by email when there is a change in WAN IP
that was earlier supplied to you.
1. Under the CONFIGURATION
command menu, click on WAN
PPPoE Setup or WAN PPTP Setup,
and you will be brought to the
following screen.
2. Click on the Email Notify button.