Compex NetPassage 28G, Руководство пользователя, Страница: 55 / 185

Chapter 5 Advanced Configuration
46
Steps to set up WDS in the Router
Having learnt the flexibility of implementing a WDS-based network infrastructure, listed
here are the steps to configure your router:
1. Under the CONFIGURATION
command menu, you will find the
Advanced Wireless Options within
the Wireless Setup page. Click on the
WDS Configuration button.
2. By default, you will note that the WDS
Mode is disabled. Click the Change
button.
3. Make the selection to Enable WDS,
followed by clicking the Apply button.
4. In the following page, click on the
Add button.
5. On the following screen, in the
Hardware address field, enter the
wireless MAC address of the wireless
access point (AP) you wish the router
to associate with. Then hit the Add
button.
6. The AP added will be reflected in a
table as shown on the right. You may
add more access points to be
associated to your router.