Compex NetPassage 28G, Руководство пользователя, Страница: 26 / 185

Chapter 4 Let’s Get Going – Software Setup
17
Part 1(d): Configuring your PC with a Static IP address…
If you are using Microsoft Windows 2000 or Windows XP
1. To begin the Static IP address
configuration, follow steps 1, 2 & 3 of
Part 1(b) to get to the page on the
right.
2. Select
Use the following IP address,
and then key in 192.168.168.X for the
IP address field, where X is any
number from 2 to 254. Following that,
enter 255.255.255.0 for the Subnet
mask, and key in the IP address of
the router as the Default gateway.
(Note that the default IP address of the
router is 192.168.168.1).
3. Now
select Use the following DNS
server addresses, and then key in the
IP address of your DNS server in the
Preferred DNS server field. Finally,
click the OK button to complete.
d
e
X
pert
e
X
pert
!
Important: For step 5 above, you should not configure
more than one computer with the same host name
within a network. This will result in a conflict.
The DNS Server’s IP address required in step 5 sis
provided by your Internet Service Provider (ISP). If you
are unsure about it, please contact your ISP.