B
B
B
B
Wring diagram
Red -power + DC12-15V
Black -power GND
Brown -door status detecting
Orange- unlocking button 1
Yellow- unlocking button 2
Green- GND
Blue- NO 2
Purple- COM 2
Gray- NC 2
White- NO 1
Pink- COM 1
Aqua- NC 1
Red
Black
Power supply
+
-
Brown
Orange
Yellow
Green
Button 1
Button 2
GND
Purple COM 2
Gray NC 2
White
Pink
Aqua
Blue NO 2
NO 1
NC 1
COM 1
DC/AC
power
adapter
Door lock
NO 1
NC 1
NO 2
NC 2
8
7
J. Add the master card
Enter the setting mode:
Press the button
and
,the mode indicator will flash green,
it indicates there is no master card stored ,(if the indicator is turned
green ,it indicates there is already data existed, press the button
twice to clean out the data, and then the indicator will flash
green )swipe the master card (a long beep will be heard ,it indicates
that adding success) press the button
to quit.
7
Using the master card enter the setting mode:
Swipe the master card , the indicator will flash yellow whilst a
will be heard ,enter the setting mode.
long beep
Swipe the master card again, the indicator will turn green whilst
three times rapid beep will be heard, quit the setting mode.
4. Hold pressing the button
whilst plug power in if the admin
is lost (a long beep will be heard , the code will be restore to the
factory default 12345 .
5. Two rapid beep indicates wrong input occurred. The system will
automatically quit in 30 seconds of inactivity,
code
6. The user code must be different from the administration code.
The code of ZONE 1
that of ZONE2
be different from
NOTE:
7. The access control will be locked for 60s if the mistaken code
continuously input or swipe the invalid card for 5 times, both the
keypad operating and the card swiping is not available.
8. Detect the door status:when someone open the door and come in ,
the door is closed, the system will automatically detecte the door
status and lock the door even though the it is still in delay period.
Door magnet
UnRegister
ed
