B
B
B
B
①
②
③
④
⑤
NO.
Description
①
②
③
④
⑤
Mode indicator
Door indicator
Antenna
Matrix keypad
Case screw
1.with internal EM reader
2.Frequency:125KHZ
3.effective distance:5 cm.
4.up to 1000 password & card holders.
5.card access, code access and combined access.
6.digital keypad operation.
7.built-in pickproof function.
8.watchdog timer, powerful reboot and self-recovery watchdog
can connect with the external unlock button .
9.power consumption : DC 12-15V, Current:150mA
10.unlock output delay time:0~99s.
11.IP Rating:65
12.dual relay outputs.
13.dimension:76*120*22mm
DH16A-10DT
Specifications/features
front panel description
installation
4.use the screws provided to mount the back case on
the wall ,be sure to draw the wiring through the
large centre hole in back case, and Keep it level.
5.connected accurately the system wiring as per the label enclosed
on the rear.
Before installing ,position the location where the controller
unit is to be mounted , operation according to the following steps:
1.open the controller by loosening and removing the
back case screw at the bottom using the spline tool .
3.use the provided drilling template accurately locate
and drill the required holes, the four drilling holes
marked
B
.
“ ”
Screw anchors
System wiring
Screws
6.replace the unit back and screwed it on using the spline tool.
1
2
UnRegister
ed
