3-1
Compaq ProLiant 800 Servers Supporting Pentium II Processors and 100-MHz System Bus Setup and Installation
Guide
Writer: Rick Chew Project: Compaq ProLiant 800 Servers Supporting Pentium II Processors and 100-MHz System
Bus Setup and Installation Guide Comments: 179489-001
File Name: d-ch03.doc Last Saved On: 3/31/98 10:10 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Chapter 3
Overview of Installing
Hardware Options
For complete hardware option installation instructions, refer to the installation
documentation that came with the option kit. For an illustrated overview of
installing many Compaq option upgrades, refer to the Hardware Installation
and Configuration poster included in the shipping box, or to the installation
labels located on the inside of the large access panel and on the small access
panel. If you have any problems, contact your Authorized Compaq Reseller.
The new server chassis facilitates the installation of hardware upgrades. Most
hardware options are installed on the expansion system board, on the
processor system board, and in the drive bay area. Use the following table to
determine how to gain access to internal server components.
Table 3-1
Gaining Access to Internal Components
To Gain Access To:
You Will Need To:
Back of drive bays
Open the front bezel* and remove the large
access panel
Expansion I/O slots
Open the front bezel* and remove the small
access panel
Expansion system board
Open the front bezel* and remove the small
access panel
Front of media drive bays
Open the front bezel*
Internal SCSI cable
Open the front bezel* and remove the large
access panel
Internal SCSI connector
Open the front bezel* and remove the large
access panel
Memory (DIMM)
Remove the processor cage**
Second Pentium II
processor (CPU)
Remove the processor cage**
Switches for processor
components
Remove the processor cage**
