4–22
Maintenance and Service Guide
Removal and replacement procedures
2. Turn the computer display-side up with the front toward you.
3. Open the computer as far as possible.
4. Lift the rear edge
1
of the keyboard until it rests at an angle.
✎
The keyboard is held by two-sided tape.
5. Slide the keyboard
2
back until the tabs on the bottom of the keyboard are clear of the keyboard cover.
6. Release the zero insertion force (ZIF) connector
1
to which the keyboard cable is attached, and thendisconnect
the keyboard cable
2
from the system board.
7. Remove the keyboard.
Reverse this procedure to install the keyboard.
